Zum Inhalt springen
AGIPD: A multi megapixel, multi megahertz X-ray camera for the European XFEL
- Link:
-
- Autor/in:
-
- Trunk, U.
- Allahgholi, A.
- Becker, J.
- Delfs, A.
- Dinapoli, R.
- Göttlicher, P.
- Graafsma, H.
Greiffenberg, D. Hirsemann, H. Jack, S. Klyuev, A. - Zeige mehr (+4)…
- Zeige weniger…
- Erscheinungsjahr:
- 2017
- Medientyp:
- Text
- Schlagworte:
-
- Readout systems
- Pixels
- Vertex detector
- Detectors
- High Energy Physics
- Readout Systems
- Readout systems
- Pixels
- Vertex detector
- Detectors
- High Energy Physics
- Readout Systems
- Beschreibung:
-
- © 2017 SPIE. AGIPD is a hybrid pixel detector developed by DESY, PSI, and the Universities of Bonn and Hamburg. It is targeted for use at the European XFEL, a source with unique properties: a train of up to 2700 pulses is repeated at 10 Hz rate. The pulses inside a train are ≤100fs long and separated by 220 ns, containing up to 10 12 photons of 12.4 keV each. The readout ASICs with 64 x 64 pixels each have to cope with these properties: Single photon sensitivity and a dynamic range up to 10 4 photons/pixel in the same image as well as storage for as many as possible images of a pulse train for delayed readout, prior to the next train. The high impinging photon flux also requires a very radiation hard design of sensor and ASIC, which uses 130 nm CMOS technology and radiation tolerant techniques. The signal path inside a pixel of the ASIC consists of a charge sensitive preamplifier with 3 individual gains, adaptively selected by a subsequent discriminator. The preamp also feeds to a correlated double sampling stage, which writes to an analogue memory to record 352 frames. It is random-access, so it can be used most efficiently by overwriting bad or empty images. Encoded gain information is stored to a similar memory. Readout of these memories is via a common charge sensitive amplifier in each pixel, and multiplexers on four differential ports. Operation of the ASIC is controlled via a command interface, using 3 LVDS lines. It also serves to configure the chip's operational parameters and timings.
- Lizenz:
-
- info:eu-repo/semantics/restrictedAccess
- Quellsystem:
- Forschungsinformationssystem der UHH
Interne Metadaten
- Quelldatensatz
- oai:www.edit.fis.uni-hamburg.de:publications/00524b73-a2e4-446d-83bd-8554ad350439