16 Einträge gefunden

1. Influence of delamination characteristics in carbon fibre/epoxy laminates on signal features of pulse thermography

   1. Schmutzler, Henrik
   2. Garcia, Alejandro
   3. Sato, Narumichi
   4. Wittich, Hans
   5. Nishikawa, Masaaki
   6. Rohling, Hermann
   7. Hojo, Masaki

   2014 - TUHH Open Research
2. The influence of delamination opening in carbon fibre/epoxy laminates on signal characteristics of pulse phase thermography

   1. Schmutzler, Henrik
   2. Sato, Narumichi
   3. Garcia, Alejandro
   4. Schütt, Martin
   5. Wittich, Hans
   6. Nishikawa, Masaaki
   7. Rohling, Hermann

   2013 - TUHH Open Research
3. Micro/macro-mechanical approach of first ply failure in CFRP

   1. Fiedler, Bodo
   2. De Jong, Claas
   3. Hobbiebrunken, Thomas
   4. Hojo, Masaki
   5. Schulte, Karl

   2006 - TUHH Open Research
4. Modelling of the transverse strength of fibre reinforced epoxy composite at low and high temperature

   1. Fiedler, Bodo
   2. Gagel, Andreas
   3. Hobbiebrunken, Thomas
   4. Schulte, Karl
   5. Hojo, Masaki
   6. Ochiai, Shojiro

   2005 - TUHH Open Research
5. Influence of stress state and temperature on the strength of epoxy resins

   1. Fiedler, Bodo
   2. Hobbiebrunken, Thomas
   3. Hojo, Masaki
   4. Schulte, Karl

   2005 - TUHH Open Research
6. Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses

   1. Hobbiebrunken, Thomas
   2. Fiedler, Bodo
   3. Hojo, Masaki
   4. Ochiai, Shojiro
   5. Schulte, Karl

   2005 - TUHH Open Research
7. Modelling of the initial failure of CFRP structures by partial discretisation: A micro/macro-mechanical approach of first ply failure

   1. Fiedler, Bodo
   2. Holst, Stefan
   3. Hobbiebrunken, Thomas
   4. Hojo, Masaki
   5. Schulte, Karl

   2004 - TUHH Open Research
8. Nondimensional simulation of tensile behavior of UD microcomposite under energy release rate and shear stress criteria for interfacial debonding

   1. Ochiai, Shojiro
   2. Hojo, Masaki
   3. Tanaka, Mototsugu
   4. Okuda, Hiroshi
   5. Schulte, Karl
   6. Fiedler, Bodo

   2004 - TUHH Open Research
9. Thermomechanical analysis of micromechanical formation of residual stresses and initial matrix failure in CFRP

   1. Hobbiebrunken, Thomas
   2. Hojo, Masaki
   3. Fiedler, Bodo
   4. Tanaka, Mototsugu
   5. Ochiai, Shojiro
   6. Schulte, Karl

   2004 - TUHH Open Research
10. Nondimensional simulation of influence of toughness of interface on tensile stress-strain behavior of unidirectional microcomposite

    1. Ochiai, Shojiro
    2. Hojo, Masaki
    3. Schulte, Karl
    4. Fiedler, Bodo

    2001 - TUHH Open Research
11. Finite-element modeling of initial matrix failure in CFRP under static transverse tensile load

    1. Fiedler, Bodo
    2. Hojo, Masaki
    3. Ochiai, Shojiro
    4. Schulte, Karl
    5. Ochi, M.

    2001 - TUHH Open Research
12. Failure behavior of an epoxy matrix under different kinds of static loading

    1. Fiedler, Bodo
    2. Hojo, Masaki
    3. Ochiai, Shojiro
    4. Schulte, Karl
    5. Ando, M.

    2001 - TUHH Open Research
13. Interfacial debonding in single fibre-composite with a cracked matrix - Part 2: Debonding during loading

    1. Ochiai, Shojiro
    2. Hojo, Masaki
    3. Schulte, Karl
    4. Fiedler, Bodo

    1999 - TUHH Open Research
14. Growth of interfacial debonding in notched two-dimensional unidirectional composite under stress and displacement controls

    1. Ochiai, Shojiro
    2. Fiedler, Bodo
    3. Hojo, Masaki
    4. Schulte, Karl

    1999 - TUHH Open Research
15. Interfacial debonding in single fibre-composite with a cracked matrix - Part 1: Debonding during cooling

    1. Ochiai, Shojiro
    2. Hojo, Masaki
    3. Schulte, Karl
    4. Fiedler, Bodo

    1999 - TUHH Open Research
16. A shear-lag approach to the early stage of interfacial failure in the fiber direction in notched two-dimensional unidirectional composites

    1. Ochiai, Shojiro
    2. Hojo, Masaki
    3. Schulte, Karl
    4. Fiedler, Bodo

    1997 - TUHH Open Research