11 Einträge gefunden

1. The influence of clamping pressure on joint formation and mechanical performance of Ti6Al4V/CF-PEEK friction-riveted joints

   1. Borba, Natascha Zocoller
   2. dos Santos, Jorge F.
   3. Amancio-Filho, Sergio T.

   2019 - TUHH Open Research - frei zugänglich
2. Friction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performance

   1. Cordeiro de Proença, Bruno
   2. Blaga, Lucian-Attila
   3. dos Santos, Jorge F.
   4. Canto, Leonardo Bresciani
   5. Amancio Filho, Sergio de Traglia

   2017 - TUHH Open Research
3. Ultrasonic joining of through-the-thickness reinforced TI-4AL-6V and polyetherimide hybrid joints

   1. Etzberger Feistauer, Eduardo
   2. Ebel, Thomas
   3. dos Santos, Jorge F.
   4. Amancio, Sergio

   2017 - TUHH Open Research
4. Influence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap joints

   1. Goushegir, Seyed Mohammad
   2. dos Santos, Jorge F.
   3. Amancio, Sergio

   2017 - TUHH Open Research
5. An overview on the materials and mechanical behavior used in fused deposition modeling

   1. Falck, Rielson
   2. dos Santos, Jorge F.
   3. Amancio, Sergio

   2017 - TUHH Open Research
6. Failure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniques

   1. Goushegir, Seyed Mohammad
   2. dos Santos, Jorge F.
   3. Amancio, Sergio

   2016 - TUHH Open Research
7. Preliminary analytical modeling of heat input in friction riveting

   1. Amancio, Sergio
   2. dos Santos, Jorge F.

   2016 - TUHH Open Research
8. Friction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanisms

   1. Manente André, Natália
   2. Goushegir, Seyed Mohammad
   3. dos Santos, Jorge F.
   4. Canto, Leonardo Bresciani
   5. Amancio, Sergio

   2016 - TUHH Open Research
9. On the feasibility of a friction-based staking joining method for polymer-metal hybrid structures

   1. Bastos Abibe, André
   2. Sônego, Marília
   3. dos Santos, Jorge F.
   4. Canto, Leonardo Bresciani
   5. Amancio, Sergio

   2016 - TUHH Open Research
10. Ultrasonic joining: A novel direct-assembly technique for metal-composite hybrid structures

    1. Etzberger Feistauer, Eduardo
    2. Guimarães, R. P. M.
    3. Ebel, Thomas
    4. dos Santos, Jorge F.
    5. Amancio, Sergio

    2016 - TUHH Open Research
11. XPS analysis of the interface between AA2024-T3/CF-PPS friction spot joints

    1. Goushegir, Seyed Mohammad
    2. Scharnagl, Nico
    3. dos Santos, Jorge F.
    4. Amancio, Sergio

    2015 - TUHH Open Research