10 Einträge gefunden

1. New test approach to determine the transverse tensile strength of CFRP with regard to the size effect

   1. Liebig, Wilfried
   2. Leopold, Christian
   3. Hobbiebrunken, Thomas
   4. Fiedler, Bodo

   2016 - TUHH Open Research
2. Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments

   1. Hobbiebrunken, Thomas
   2. Hojo, Masaki
   3. Adachi, Taiji
   4. De Jong, Claas
   5. Fiedler, Bodo

   2006 - TUHH Open Research
3. Experimental determination of the true epoxy resin strength using micro-scaled specimens

   1. Hobbiebrunken, Thomas
   2. Fiedler, Bodo
   3. Hojo, Masaki
   4. Tanaka, Mototsugu

   2006 - TUHH Open Research
4. A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element

   1. Trias, Daniel
   2. Costa, Josep
   3. Fiedler, Bodo
   4. Hobbiebrunken, Thomas
   5. Hurtado, Jorge E.

   2006 - TUHH Open Research
5. Micro/macro-mechanical approach of first ply failure in CFRP

   1. Fiedler, Bodo
   2. De Jong, Claas
   3. Hobbiebrunken, Thomas
   4. Hojo, Masaki
   5. Schulte, Karl

   2006 - TUHH Open Research
6. Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses

   1. Hobbiebrunken, Thomas
   2. Fiedler, Bodo
   3. Hojo, Masaki
   4. Ochiai, Shojiro
   5. Schulte, Karl

   2005 - TUHH Open Research
7. Modelling of the transverse strength of fibre reinforced epoxy composite at low and high temperature

   1. Fiedler, Bodo
   2. Gagel, Andreas
   3. Hobbiebrunken, Thomas
   4. Schulte, Karl
   5. Hojo, Masaki
   6. Ochiai, Shojiro

   2005 - TUHH Open Research
8. Influence of stress state and temperature on the strength of epoxy resins

   1. Fiedler, Bodo
   2. Hobbiebrunken, Thomas
   3. Hojo, Masaki
   4. Schulte, Karl

   2005 - TUHH Open Research
9. Thermomechanical analysis of micromechanical formation of residual stresses and initial matrix failure in CFRP

   1. Hobbiebrunken, Thomas
   2. Hojo, Masaki
   3. Fiedler, Bodo
   4. Tanaka, Mototsugu
   5. Ochiai, Shojiro
   6. Schulte, Karl

   2004 - TUHH Open Research
10. Modelling of the initial failure of CFRP structures by partial discretisation: A micro/macro-mechanical approach of first ply failure

    1. Fiedler, Bodo
    2. Holst, Stefan
    3. Hobbiebrunken, Thomas
    4. Hojo, Masaki
    5. Schulte, Karl

    2004 - TUHH Open Research