53 Einträge gefunden

1. Self-lubricating CrAlMoN high performance tool coatings for machining of TiAl6V4

   1. Bobzin, Kirsten
   2. Kalscheuer, Christian
   3. Carlet, Marco
   4. Stachowski, Nina
   5. Hintze, Wolfgang
   6. Möller, Carsten
   7. Ploog, Petter

   2022 - TUHH Open Research
2. Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CRFP Components (SAE Paper 2022-01-0041)

   1. Brillinger, Christoph
   2. Kallipalayam Murugesan, Satheesh Kumar
   3. Möller, Christian
   4. Böhlmann, Christian
   5. Hintze, Wolfgang
   6. Niermann, Dirk

   2022 - TUHH Open Research
3. Experimental analysis of a hybrid drive train implemented in a novel industrial robot approach

   1. Hamann, Tobias
   2. Hansen, Stephan
   3. Bitterolf, David
   4. Böhlmann, Christian
   5. Möller, Christian
   6. Seifried, Robert
   7. Hintze, Wolfgang

   2022 - TUHH Open Research
4. Workshop-suited geometric errors identification of three-axis machine tools using on-machine measurement for long term precision assurance

   1. Breitzke, André
   2. Hintze, Wolfgang

   2022 - TUHH Open Research
5. A General Unique Description of Cutting Direction and Engagement for Arbitrary Oblique Cutting of Orthotropic Materials – Modeling and Validation for Grinding of Unidirectional CFRP

   1. Hintze, Wolfgang
   2. Köttner, Lars
   3. Brouschkin, Alexander
   4. Blühm, Melchior Frieder
   5. Jakele, Lukas

   2022 - TUHH Open Research
6. Influence of self-lubricating tool coatings on cutting temperature and coefficient of friction during turning of Ti6Al4V

   1. Hintze, Wolfgang
   2. Möller, Carsten
   3. Ploog, Petter
   4. Bobzin, Kirsten
   5. Kalscheuer, Christian
   6. Stachowski, Nina

   2022 - TUHH Open Research
7. Implementation of MC-SPG particle method in the simulation of orthogonal turning process

   1. Rana, Pulkit
   2. Hintze, Wolfgang
   3. Schall, T.
   4. Polley, W.

   2022 - TUHH Open Research
8. Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining

   1. Romanenko, Denys
   2. Jothi Prakash, Vishnuu
   3. Kuhn, Tobias
   4. Möller, Carsten
   5. Hintze, Wolfgang
   6. Emmelmann, Claus

   2022 - TUHH Open Research - frei zugänglich
9. Study on the Influence of the Coating Thickness in Turning of a Hard to Machine Material Using FEM-Simulation

   1. Rana, Pulkit
   2. Hintze, Wolfgang
   3. Schall, T.
   4. Polley, W.

   2022 - TUHH Open Research
10. Tuned mass dampers for boring bars with small diameter

    1. Hintze, Wolfgang
    2. Hinrichs, Marco
    3. Rosenthal, Oliver
    4. Schleinkofer, Uwe
    5. Venturini, Remus

    2022 - TUHH Open Research
11. Model based prediction of force and roughness extrema inherent in machining of fibre reinforced plastics using data merging

    1. Hintze, Wolfgang
    2. Brouschkin, Alexander
    3. Köttner, Lars
    4. Blühm, Melchior Frieder

    2022 - TUHH Open Research
12. Holistic process monitoring with machine learning classification methods using internal machine sensors for semi-automatic drilling

    1. Hintze, Wolfgang
    2. Romanenko, Denys
    3. Molkentin, Lukas
    4. Köttner, Lars
    5. Mehnen, Jan Philipp

    2022 - TUHH Open Research - frei zugänglich
13. Wear development of self-lubricating CrAlVN coatings during turning Ti6Al4V

    1. Bobzin, Kirsten
    2. Kalscheuer, Christian
    3. Carlet, Marco
    4. Stachowski, Nina
    5. Hintze, Wolfgang
    6. Möller, Carsten
    7. Ploog, Petter

    2021 - TUHH Open Research - frei zugänglich
14. Impact separation of support structures from laser powder bed fusion generated LPBF parts

    1. Möller, Carsten
    2. Hintze, Wolfgang
    3. Wenserski, Robert von

    2021 - TUHH Open Research
15. Subsequent synchronization of individual monitoring systems for machining of aircraft structures via a data collector using OPC UA

    1. Schulze, Benjamin
    2. Rawal, Parth
    3. Kothe, Simon M.
    4. Hintze, Wolfgang

    2021 - TUHH Open Research
16. Automated Assembly of Thermoplastic Fuselage Structures for Future Aircrafts

    1. Kothe, Simon M.
    2. Diehl, B.
    3. Niermann, Dirk
    4. Chen, L.
    5. Wolf, M.
    6. Hintze, Wolfgang

    2021 - TUHH Open Research
17. Influence of contour radius and fiber orientation on heat accumulation during machining of unidirectional CFRP

    1. Mehnen, Jan Philipp
    2. Hintze, Wolfgang
    3. Köppe, Marek

    2021 - TUHH Open Research
18. Curved circular cutting of lightweight structures

    1. Hintze, Wolfgang
    2. Köttner, Lars

    2021 - TUHH Open Research
19. Automated removal of carbon fiber reinforced plastic layers for the repair by adhesive bonding

    1. Brieskorn, Leander
    2. Hintze, Wolfgang

    2020 - TUHH Open Research
20. Finish machining of Ti6Al4V SLM components under consideration of thin walls and support structure removal

    1. Hintze, Wolfgang
    2. Wenserski, Robert von
    3. Junghans, Sebastian
    4. Möller, Carsten

    2020 - TUHH Open Research - frei zugänglich