The application range of aerogels, especially in the life-science sector, can be extended by utilizing biocompatible polymers such as polylactic acid (PLA). However, the low glass transition temperature (Tg) of PLA and the challenging gelation techniques limit the application of supercritical CO2 (scCO2) drying and thus the PLA-aerogel production. The aim of this work is to overcome this challenge and to provide a better understanding of the thermodynamics of the process. Therefore, the gelation of amorphous PLA (PDLLA) and semicrystalline PLA (PLLA) via thermal-induced phase separation (TIPS) was studied. To identify polymer/solvent/antisolvent ratios suitable for gelation, thermodynamic modeling (PC-SAFT) was used to describe the corresponding ternary phase diagrams. scCO2 drying was used to preserve the mesoporous gel structure formed during the gelation. Due to the decrease in the Tg of PLA in the presence of CO2, this could not be applied to all gels. It was found that the critical parameter to enable the scCO2 drying of low Tg polymers is the crystallinity degree (Xc) of the polymer. Based on these results, some guidelines for producing aerogels from polymers with low Tg are formulated. Graphical abstract: [Figure not available: see fulltext.]
