In the present work, the steady-state behavior of a Chemical Looping Combustion process of interconnected fluidized bed reactors is simulated. The simulations have been carried out in two different scales, 50 kWth and 100 MWth. Attrition model derived from small scale laboratory experiments has been employed for the prediction of the process behavior in terms of attrition and Oxygen Carrier loss. Information on Oxygen Carrier characteristics and reaction kinetics were taken from literature. Realistic circulation mass flows of Oxygen Carrier particles are obtained and Oxygen Carrier losses are quantified. The large scale process looses significantly more Oxygen Carrier than the small scale process based on the same amount of thermal energy produced. Incomplete conversion in the air reactor could be identified as a critical point. Another issue is the fuel gas bypassing the Oxygen Carrier particles through bubbles in the large scale process which leads to lowered fuel conversions. The simulations indicate that a similar performance of a pilot scale and a large scale process is not guaranteed due to the scale-up effect on fluid dynamics. Furthermore, the simulations allow an assessment of the influence of the quality of the solids recovery system on the Oxygen Carrier loss. The distribution of the losses between possible origins is investigated and different changes in the solids recovery system are discussed regarding their potential to decrease the Oxygen Carrier loss. For example, the addition of a second-stage cyclone after the air reactor of the large scale process reduces the Oxygen Carrier loss significantly.
