69 Einträge gefunden

1. Patient-specific miniplates versus patient-specific reconstruction plate: a biomechanical comparison with 3D-printed plates in mandibular reconstruction

   1. Steffen, Claudius
   2. Sellenschloh, Kay
   3. Willsch, Magdalena
   4. Soares, Ana Prates
   5. Morlock, Michael
   6. Heiland, Max
   7. Kreutzer, Kilian

   2023 - TUHH Open Research
2. Impaction procedure influences primary stability of acetabular press-fit components

   1. Ruhr, Miriam
   2. Huber, Gerd
   3. Niki, Yasaman
   4. Lohner, Larissa
   5. Ondruschka, Benjamin
   6. Morlock, Michael

   2023 - TUHH Open Research
3. Densification of cancellous bone with autologous particles can enhance the primary stability of uncemented implants by increasing the interface friction coefficient

   1. Zobel, Sebastian Manuel
   2. Ruhr, Miriam
   3. Neumann, Fenna
   4. Huber, Gerd
   5. Morlock, Michael

   2022 - TUHH Open Research
4. Which length should the neck segment of modular revision stems have?

   1. Huber, Gerd
   2. Morlock, Michael

   2022 - TUHH Open Research
5. Acromioclavicular joint suture button repair leads to coracoclavicular tunnel widening

   1. Ntalos, Dimitris
   2. Huber, Gerd
   3. Wichern, Y.
   4. Sellenschloh, Kay
   5. Püschel, Klaus
   6. Mader, Konrad
   7. Morlock, Michael

   2022 - TUHH Open Research - frei zugänglich
6. Influence of bone morphology and femur preparation method on the primary stability of hip revision stems

   1. Konow, Tobias
   2. Schlieker, Peter
   3. Lampe, Frank
   4. Ondruschka, Benjamin
   5. Morlock, Michael
   6. Huber, Gerd

   2022 - TUHH Open Research - frei zugänglich
7. Rescue augmentation: increased stability in augmentation after initial loosening of pedicle screws

   1. Weiser, Lukas
   2. Huber, Gerd
   3. Sellenschloh, Kay
   4. Püschel, Klaus
   5. Morlock, Michael
   6. Viezens, Lennart
   7. Lehmann, Wolfgang

   2021 - TUHH Open Research - frei zugänglich
8. All-suture anchor pullout results in decreased bone damage and depends on cortical thickness

   1. Ntalos, Dimitris
   2. Huber, Gerd
   3. Sellenschloh, Kay
   4. Saito, Hiroaki
   5. Püschel, Klaus
   6. Morlock, Michael
   7. Frosch, Karl-Heinz

   2021 - TUHH Open Research - frei zugänglich
9. Lag-screw osteosynthesis in thoracolumbar pincer fractures

   1. Auerswald, Marc
   2. Messer-Hannemann, Philipp
   3. Sellenschloh, Kay
   4. Wahlefeld, Jan
   5. Püschel, Klaus
   6. Hirschfeld Araujo, Sven
   7. Morlock, Michael

   2021 - TUHH Open Research - frei zugänglich
10. Impact of Screw Diameter on Pedicle Screw Fatigue Strength - A Biomechanical Evaluation

    1. Viezens, Lennart
    2. Sellenschloh, Kay
    3. Püschel, Klaus
    4. Morlock, Michael
    5. Lehmann, Wolfgang
    6. Huber, Gerd
    7. Weiser, Lukas

    2021 - TUHH Open Research
11. Cortical threaded pedicle screw improves fatigue strength in decreased bone quality

    1. Weiser, Lukas
    2. Sellenschloh, Kay
    3. Püschel, Klaus
    4. Morlock, Michael
    5. Viezens, Lennart
    6. Lehmann, Wolfgang
    7. Huber, Gerd

    2021 - TUHH Open Research - frei zugänglich
12. Reduced cement volume does not affect screw stability in augmented pedicle screws

    1. Weiser, Lukas
    2. Sellenschloh, Kay
    3. Püschel, Klaus
    4. Morlock, Michael
    5. Viezens, Lennart
    6. Lehmann, Wolfgang
    7. Huber, Gerd

    2020 - TUHH Open Research - frei zugänglich
13. Do SiNx coatings bear the potential to reduce the risk of micromotion in modular taper junctions?

    1. Haschke, Henning
    2. Falkenberg, Adrian
    3. Morlock, Michael
    4. Huber, Gerd

    2020 - TUHH Open Research
14. Taper corrosion: a complication of total hip arthroplasty

    1. Morlock, Michael
    2. Hube, Robert
    3. Wassilew, Georgi Iwan
    4. Prange, Felix
    5. Huber, Gerd
    6. Perka, Carsten

    2020 - TUHH Open Research - frei zugänglich
15. Biomechanical comparison of polylactide-based versus titanium miniplates in mandible reconstruction in vitro

    1. Steffen, Claudius
    2. Sellenschloh, Kay
    3. Polster, Valerie-Sophie Amber
    4. Heyland, Mark
    5. Vollmer, Matthias
    6. Morlock, Michael
    7. Heiland, Max

    2020 - TUHH Open Research
16. Comparative biomechanical in vitro study of different modular total knee arthroplasty revision stems with bone defects

    1. Guttowski, Dario
    2. Polster, Valerie-Sophie Amber
    3. Huber, Gerd
    4. Morlock, Michael
    5. Püschel, Klaus
    6. Nüchtern, Jakob Valentin

    2020 - TUHH Open Research
17. Fatigue strength reduction of Ti–6Al–4V titanium alloy after contact with high-frequency cauterising instruments

    1. Zobel, Sebastian Manuel
    2. Morlock, Michael
    3. Huber, Gerd

    2020 - TUHH Open Research
18. Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors

    1. Falkenberg, Adrian
    2. Biller, Sara
    3. Morlock, Michael
    4. Huber, Gerd

    2020 - TUHH Open Research
19. Biomechanical comparison of titanium miniplates versus a variety of CAD/CAM plates in mandibular reconstruction

    1. Steffen, Claudius
    2. Sellenschloh, Kay
    3. Vollmer, Matthias
    4. Morlock, Michael
    5. Heiland, Max
    6. Huber, Gerd
    7. Rendenbach, Carsten

    2020 - TUHH Open Research
20. Influence of flexural rigidity on micromotion at the head-stem taper interface of modular hip prostheses

    1. Haschke, Henning
    2. Konow, Tobias
    3. Huber, Gerd
    4. Morlock, Michael

    2019 - TUHH Open Research - frei zugänglich